Teastech Ltd. offers the full range of Saint-Gobain Performance Plastics products. These include flexible tubing, PTFE materials, Belting materials, Gasketing Foams, Bonding Tapes and High-performance Masking Tapes.
Formulated to withstand extreme temperatures from -75°F to 275°F, Tygon E-65-F tubing will not crack or deteriorate when used in demanding food and beverage applications. Extremely flexible, it resists kinks and retains its shape while installing quickly and easily. Its excellent flexural fatigue resistance makes it the absolute best choice for use in peristaltic pumps often found in dispensing equipment.
Tygon E-65-F was submitted to a sensory analysis by an independent and objective party* and the results indicate a taste free and odor free profile for applications with cola syrup and equivalent products, and also applications with milk and similar dairy products. It also provides resistance to many harsh food media, including some animal and vegetable oils.
Tygon E-65-F is NSF-51, FDA and Regulation (EC) No 1935/2004 compliant
View Data Sheet
Normount V2000 series bonding tapes combine a high density, closed cell polyurethane foam substrate with a high performance acrylic adhesive on both sides.
Normount foam substrates absorbs vibrations and distributes stress forces over the entire bond line. The closed cell structure also allows the V2000 series to e used as a gasket for applications in severe environments. The high strength adhesive increases its overall capabilities.
View Data Sheet
Normount V1300 series bonding tapes combine a polyurethane foam substrate with a durable, pressure-sensitive adhesive on both sides. The foam properties dissipate vibrations and distributes stress forces, while the adhesive maintains a long-term bond. The conformability promotes maximum surface contact with less distortion, thus providing superior adhesive wet-out and bond.
View Data Sheet
The CHEMSTIK® range of products comprises Teflon® (PTFE) coated woven glass fabric with pressure sinsitive adhesive on one side.
CHEMSTIK® is produced with either a Silicone or Acrylic pressure sensitive adhesive. Silicone adhesive products have a continuous operating temperature range of -70ºC to +260ºC.
Acrylic adhesive systems provide high initial tack and enhanced solvent resistance. The temperature rating for the Acrylic adhesives is
-40ºC to +177ºC.
Saint-Gobain’s careful selection of resin type, particle size, temperature and pressure produces smooth, non-porous, dimensionally stable tubing. Made out of polytetrafluorethylene resin Versilon™ PTFE tubing has the highest working temperature of any fluoropolymer tubing available today.
In order to consistently ensure the quality of our product, we only use raw material properties according to the customer needs and the corresponding requirements.
There are a huge range of materials that can be used to construct the belt including coated fabrics, CHEMLAM® laminated products, KEVLAR®, open mesh and anti-static.
View Data SheetWe can tailor the belt construction and joint to your needs. A reinforcement strip along the belt edge can protect the belt from ripping. Sometimes it is not possible to edge a belt due to the application, packaging for example. Endless belts can be made that have no increase in belt thickness at the joint. This is crucial in some packaging applications. A flap can be provided to prevent your product falling through the belt joint.
View Data Sheet
Seal, shock and vibration absorber. Flame retardant grade.
NORSEAL 4031 is a medium density closed cell PVC foam sealant with “swirl-free” capability. NORSEAL 4031 was specifically created to work with mechanical fasteners. The unique foam resists distortion from drilling, riveting and other fastening operations, making it ideal for metal to metal joints.
View Data SheetSoft, closed cell PVC, foam. Watertight seal. Flame Retardant Grade
NORSEAL 2521 is a closed cell PVC foam with a very low density and a low force to compress.
NORSEAL 2521 is designed to create a watertight seal with a minimal amount of force. This ability allows it to conform easily to rough or irregular surfaces. It is also ideal for sealing thin gauge metals or plastics which could distort under greater pressures.
View Data SheetEngineering for High Performance Gasketing Applications
Norseal K Series Micro-cellular Polyurethane Foam
The Norseal series micro-cellular polyurethane Foams are offered in a broad range of properties, making them ideal for a variety of gasketing and energy absorption needs.
View Data Sheet
NORSEAL® foam sealant combines a closed-cell polyvinyl chloride foam substrate with pressure sensitive adhesive on both sides. For 40 years, NORSEAL’s proven performance in the window glazing market has made it the preferred choice in a variety of glazing applications.
View Data Sheet
KOREL K40 is a medium deflection, microcellular polyurethane foam with minimal compression set, ideal for gasketing.
View Data SheetKOREL K60 is a very firm deflection, microcellular polyurethane foam with excellent gauge tollerances.
View Data Sheet
See attached document comparing silicone sponge with silicone rubber with the advantages of each.
View Data SheetFor extreme temperature applications, Strip-N-Stick silicone rubber tapes outperform all other elastomer tapes in service life, weatherability, compression set resistance and electrical resistivity. These pressure-sensitive Strip-N-Stick tapes are available in a variety of widths and thicknesses for use in gasketing, cushioning, thermal insulation and vibration dampening applications. Other uses include noise reduction, clamping of hot parts and electrolysis reduction between dissimilar metals.
View Data Sheet
The Tygon Application Guide lists the full range of Tygon Products. It lists availability in all sizes. A handy guide is also included that shows each formulation’s resistance to a large variety of chemicals.
View Data Sheet
Tygon S3™ E-3603 tubing from Saint-Gobain Performance Plastics is now Phthalate-free. Saint-Gobain is proud to be among the first companies to offer sustainable flexible tubing products.
The bio-based Tygon S3™ line combines the high performance standards customers demand with an eco-friendly tubing.
Crystal-clear and flexible, long lasting and crack resistant, the new Tygon S3™ E-3603 delivers the same superior performance you have come to expect but now a formulation that contains a phthalate-free plasticizer.
Tygon S3™ E-3603 tubing handles the most stringent foods and beverages. It is non-oxidising and non-contaminating and less permeable than rubber tubing. The Glassy-smooth inner bore helps prevent buildup so that cleaning is facilitated. The coils ar emarked at 30.4cm interval for easy measuring.
TYGON® LMT-55 Laboratory Tubing handles most inorganic chemicals
found in the laboratory. It is non-oxidizing and non-contaminating,
and less permeable than rubber tubing. The glassy-smooth inner bore
helps prevent buildup to facilitate cleaning, and coils are marked at
1-foot (30.4 cm) intervals for easy measuring.
Crystal clear and flexible, long-lasting and crack-resistant, new
TYGON® LMT-55 Non-DEHP Laboratory and Vacuum Tubing delivers
the same superior performance you’ve come to expect, but now
in a formulation that contains a non-DEHP plasticizer. Replacing
DEHP with a globally accepted substitute eliminates concerns about
potentially harmful health effects from repeated exposure to high
levels of DEHP leachates.
Versilon™ SE-200 from Saint-Gobain Performance Plastics is now phthalate-free. Saint- Gobain are proud to be among the first companies to offer sustainable flexible tubing product. Versilon™ SE-200 tubing combines the high performance standards customers demand with an eco-friendly tubing design.
Offering flexibility, glass-like clarity and outstanding bend radius, Versilon™ SE-200 tubing can handle many applications where flexible tubing of the past could not be used. Its FEP inner liner provides the ultimate in chemical resistance and can handle a wide variety of fluids from corrosives to MEK-based solvents.
The inert liner limits the potential of fluid contamination during transfer. Versilon™ SE-200 will not impart odour or taste, making it well-suited for food and beverage use.
View Data Sheet
Made of proprietary fluoroelastomer, Versilon ™ F-5500-A tubing has both physical and chemical characteristics that make it ideal for severe environments, such as dry cleaning fluid lines and solvent recvovery systems, where other flexible tubings fail.
Versilon ™ F-5500-A tubing can be used in continuous service with temperatures as high as 400°F (204°C). The opaque, black colour of Versilon ™ F-5500-A helps protect light-sensitive materials being transferred and will not prematurely crack and age when exposed to ozone, sun and weather.
Ideal for virtually any permanent or temporary chemical transfer application, Versilon™ R-3400 Tubing combines suppleness and flexibility with resistance to a wide range of chemicals. It shows exceptional resistance to strong acids and many alkalies.
The flexibility of Versilon™ R-3400 Tubing makes it quick and easy to put into service, providing considerable savings on installation time and cost when compared with rigid piping systems.
Black in colour, Versilon™ R-3400 is resistant to ultraviolet light, ozone and weathering, making it ideal for many outdoor applications. Standard inventoried sizes of Versilon™ R-3400 Tubing have sufficient wall thickness to block transmission of all UV light.
Specifically designed to handle most fuels and industrial lubricants, Tygon® Fuel and Lubricant Tubing resists the swelling and hardening caused by hydrocarbon-based fluids.
This significantly reduces the risk of failure due to cracking and leakage. Its minimum extractability safeguards the liquid or vapor being transferred against adulteration.
Because it is extremely flexible, Tygon® Fuel and Lubricant Tubing simplifies instalation, even in tight places. It is translucent yellow for positive identification and to allow easy flow monitoring. It is routeinely used to handle gasoline, kerosene, heating oils, cutting compouns and glycol-based coolants.
Specially formulated for chemical dispensing. Tygon® A-60-G tubing outperforms neoprene, EPDM and other general-purpose tubings in test after test and application after application.
It will not weaken or crack after years of exposure to heat and ozone, providing longer pump life in industrial and institutional clean-chemical dispensing application. Engineered for outstanding performance and on-the-job reliability, Tygon® A-60-G handles temperatures from -75°F (-60°C) to 275°F (135°C), allowing the use of one material with a broad range of temperatures. It is heat sealable and can be joined without fittings. It also has excellent resistance to inorganic (acids and bases) fluids.
Ultra flexible compared many other reinforced urethane tubings, Versilon™ flexible tubing can be used in the most physically demanding applications, such as those requiring a tight bend radius.
Specially formulated from tough, ether-based polyurethane resin, Versilon™ C-455-A IB tubing is resistant to a range of chemicals, including oils, greases, solvents and chemicals.
Due of its excellent wear properties, Versilon™ C-544-A IB tubing frequently outperforms trditional rubber, plastic and metal materials when exposed to abrasive conditions. Versilon™ C-544-A IB is plasticizer-free, and remains flexible even when cycled through temperture extremes.
View Data Sheet
Our rigidly controlled manufacturing process makes Versilon™ Tubing the flexible polyurethane tubing that has consistently tight tolerances from lot to lot.
Made of a tough, ester-based polyurethane, Tygothane® Precision Polyurethane Tubing’s clarity, high tear strength and excellent abrasion resistance make it ideal for many applicatins, including fuel and lubricant liners, pneumatic lines, abrasive product transfer and cable jacketing. It also offers exceptional resistance to oils, greases, fuels and many chemicals.
Able to withstand rugged daily use, Versilon® C-210-A is able to withstand rugged daily use: it resists weathering and can be safely used in temperatures ranging from -100F° (-73°C) to 175°F (79°C).
Versilon™ Plasticizer-free Tubing is a uniquely engineered to provide flexibility, chemical resistance and extended pump life in a clear, plasticizer/oil free tubing.
It is ideal for a broad range of applications including peristaltic pump applications, soap and detergent dispensing, water purification lines, food contact applications and chemical transfer.
Peroxide-cured Versilon™ SPX-70 IB tubing is designed for use in applications where flexibility, resiliency and durability are required.
Produced from a proprietary combination of silicone elastomers, this tubing optimizes critical physical properties such as tensile strength, elongatin and compression set, resulting in a more physically durable product.
Peroxide-cured Versilon® High-Strength Silicone Tubing designed for use in applications where flexibility, resiliency and durability are required.
Produced from a proprietary combination of silicone elastomers, this tubing optimizes critical physical properties such as tensile strength elongation and compression set, resulting in a more physically durable product.
The smooth inner surface reduces the risk of particulate entrapment and microscopic build-up during fluid transfer.
View Data Sheet
Designed specifically for use in peristaltic pump applications, Tygon® XL-60 tubing maintains a pump life of over 500 hours. With a durometer hardness of Shore A 60, it is extremely flexible and exhibits superior flex life, reducing downtime due to pump tubing failure.
Tygon® XL-60 tubing can be considered an alternative to silicones and PVC when longer pump tubing life is required.
Tygon® XL-60 tubing is translucent in colour and has excellent chemical resistance to a wide range of fluids, including acids and bases. It also exhibits and excellent resistance to ozone, oxygen and sunlight aging. Tygon® XL-60 remains flexible at -40° F and is temperature resistance up to 250°F
Tygon XL-60 is NSF-51, FDA and Regulation(EU) No. 1935/2004 compliant.
View Data SheetTygon S3 E-3603 Laboratory Tubing combines all the properties of R-3603 with a new DEHP phthalate plasticiser free formulation.
Crystal-clear and flexible, Tygon R-3603 Laboratory Tubing handles virtually all inorganic chemicals found in the lab. It is non-oxidising and non-contaminating.
Long-lasting and crack resistant, Tygon R-3603 is less permeable than rubber tubing. The Glassy-smooth inner bore helps prevent buildup so that cleaning is facilitated.
Tygon S3 E-3603 is NSF-51, FDA, Regulation (EC) No. 1935/2004 and Ministry of Health and Welfare No. 370, 1959 compliant.
View Data Sheet
Crystal-clear and flexible, Tygon R-3603 (R3603) Laboratory Tubing handles virtually all inorganic chemicals found in the lab. It is non-oxidising and non-contaminating.
Long-lasting and crack resistant, Tygon R-3603 is less permeable than rubber tubing. The Glassy-smooth inner bore helps prevent buildup so that cleaning is facilitated.
Tygon S3 E-3603 is NSF-51, FDA, Regulation (EC) No. 1935/2004 and Ministry of Health and Welfare No. 370, 1959 compliant.
View Data Sheet
Tygon S3 B-44-3 is specially formulated for transferring a wide variety of beverages including soft drinks, fruit juices, flavoured teas and bottled water. In virtually all cases, Tygon S3 B-44-3 will not affect the taste or odour of products transferred through it, while its excellent non-wetting properties facilitate complete drainage and permit simple flush-cleaning.
The versatility and proven performance of Tygon™ B-44-3 tubing have made it today’s most widely specified clear, flexible plastic in beverage transfer applications.
Tygon S3 B-44-3 is NSF-51, NSF-61 FDA, Regualtion (EU) No 1935/2004 and Ministry of Health and Welfare No, 370,1959 compliant
View Data Sheet
Formulated to withstand extreme temperatures from – 75 °F to 275 °F Tygon® A-60-F IB tubing will not crack or deteriorate when used in demanding food and beverage applications.
Certain applications require using pressures that only reinforced tubing can withstand. For those applications, Tygon® A-60-F IB tubing is now available. If has the same desirable properties as Tygon® A-60-F tubing with an additional reinforcement embedded within its walls to withstand elevated pressure.
View Data Sheet
Tygon S3™ E-LFL tubing from Saint-Gobain is proud to be among the first companies to offer sustainable flexible tubing products.
The bio-based Tygon S3™ product line combines the high performance standards customers demand with and eco-friendly tubing design. Tygon S3™ E-LFL tubing is our best performing persistaltic pump tubing and has no industry equivalent.
It has been rigorously tested to ensure that it meets the same physical standards as the old Tygon® LFL tubing, including 1000 hours of persistaltic pump tubing life at 0 bar back pressure, low particulate spallation and chemical resistance.
Tygon S3 E-LFL is NSF-51, FDA, Regulation(EU) No. 1935/2004 and Ministry of Health and Welfare No. 370, 1959 compliant.
View Data Sheet
Saint-Gobain Process Systems is the leader in antimicrobial technology. Our custom compounding capabilities allow us to produce antimicrobial versions of many of our tubing products. Versilon Silver Antimicrobial Tubing is formulated with a silver-based compound on the inner surface at the point of fluid contact. The tubing’s outer surface can be treated in cases where bacteria build up is a concern.
View Data Sheet
Tygon S3™ B-44-4X I.B is designed specifically for food and beverage dispensing applications involving elevated pressure.
Tygon pressure tubing has the identical product feature found in Tygon S3™ B-44-4X tubing (clear, lightweight, flexible smooth, non-porous) bore to inhibit particle entrapment, outstanding resistance to harsh alkaline cleaners and unaffected by commonly used sanitizers), with reinforcement added to withstand up to four times the pressure.
Light in weight and easy to handle, Tygon S3 B-44-4X I.B. can be put into service quickly. It readily bends to accommodate abrupt corners and obstructions, requiring a minimum of couplings and fittings. Its flexibility can save up to one-third the footage and much of the labour required to install rigid stainless steel, glass tubing or piping.
Producers of food, milk and dairy products insist upon Tygon S3 B-44-4X for dependable performance in countless filling, draining, transfer and processing applications. Its smooth, non-porous bore inhibits particle entrapment, promoting a sanitary fluid path by minimising potential for bacterial growth. It has outstanding resistance to harsh alkaline cleansers and is equally unaffected by commonly used sanitisers.
Light in weight and easy to handle, Tygon S3 B-44-4X can be put into service quickly. It readily bends to accomadate abrupt corners and obstructions, requiring a minimum of couplings and fittings. Its flexibility can save up to one-third the footage and much of the labour required to install rigid stainless or plastic piping.
View Data Sheet